Water Testing

Boiler and Cooling Water Testing: The Essential Parameters and Test Kits

By Ramo Trading 3 min read

Boilers and cooling towers are where water treatment pays off most directly. Good control prevents scale (lost heat transfer, higher energy bills), corrosion (leaks, early equipment failure) and biological fouling. Poor control is expensive. Testing is how you know your treatment program is working.

Boiler water: what to test

Hardness

Calcium and magnesium form scale on heat-transfer surfaces. Feedwater and softener outlets are usually checked for hardness every day. Hach titration reagents such as ManVer 2 hardness indicator, CalVer 2 calcium indicator, Hardness 1 buffer and 0.0200 N EDTA titrant are standard for this test.

Alkalinity

P and M (total) alkalinity show how well the boiler is protected against corrosion and caustic attack. Phenolphthalein indicator such as Hach phenolphthalein powder pillows is used for P-alkalinity endpoints.

Oxygen scavengers

CHEMetrics DEHA comparator
CHEMetrics DEHA comparator for oxygen-scavenger residuals

Dissolved oxygen causes pitting corrosion, so treatment programs add an oxygen scavenger and check that a residual remains. CHEMetrics offers visual tests with comparators for the common chemistries:

Phosphate, silica and filming amines

Phosphate programs need regular residual checks, for example with the Hach DR300 Phosphate or the CHEMetrics phosphate method. Silica matters in high-pressure boilers and steam turbines (see the silica activator). Programs that use filming amines can test them with the filming amines comparator.

Iron and copper (corrosion indicators)

Rising iron or copper in condensate or feedwater is an early sign of corrosion. Test with the DR300 Iron or the CHEMetrics copper comparator.

Cooling water: what to test

Myron L 9P meter with titration kit
Myron L 9P with titration kit
Pyxis ST-712 inline pH and ORP analyzer
Pyxis ST-712 inline pH/ORP

Build a testing routine

  1. Define each parameter's control range with your water-treatment provider.
  2. Set test frequencies: daily for critical parameters, weekly for trend parameters.
  3. Log every result and act on any result outside the range.
  4. Verify meters and kits regularly with standards.

One supplier for your whole program

Ramo Trading supplies water-treatment testing from Hach, CHEMetrics, Pyxis, Myron L, Walchem and others. Service companies and plants can request volume pricing.

Comments (0)

Comments are reviewed before they're published.

Related articles