Water Testing

Testing Peracetic Acid and Hydrogen Peroxide in Food and Beverage Sanitation

By Ramo Trading 3 min read

Peracetic acid (PAA) has become one of the most popular sanitizers in food and beverage processing. It is used in poultry and meat processing, on produce wash lines, for clean-in-place (CIP) sanitizing and in aseptic packaging. It works fast against a broad range of microorganisms and breaks down into acetic acid, oxygen and water.

Commercial PAA products are an equilibrium mixture of peracetic acid, hydrogen peroxide, acetic acid and water. Hydrogen peroxide is also used as a sanitizer on its own. Effective sanitation depends on keeping the active chemical inside its validated range, so regular testing is a core food safety control.

Why testing matters

  • Too low: pathogens survive, sanitation fails and product is put at risk.
  • Too high: wasted chemical, possible equipment corrosion, worker exposure, and concentrations above permitted limits.
  • Documentation: food safety plans and audits require records showing sanitizer concentrations were checked and kept in range.

Testing options

CHEMetrics hydrogen peroxide comparator
CHEMetrics hydrogen peroxide comparator
Palintest Kemio PAA sensors
Palintest Kemio PAA sensors

CHEMetrics visual and instrumental kits

CHEMetrics self-filling ampoule tests make sanitizer checks simple for line operators. No pipetting or reagent mixing is needed. For hydrogen peroxide, visual comparators include the hydrogen peroxide comparator and the ferric thiocyanate hydrogen peroxide comparator. Supporting solutions such as the activator solution pack are also available. For numerical results, CHEMetrics Vacu-vials tests can be read in the V-2000 or V-3000 photometers.

Verify your method with the CHEMetrics Peracetic Acid Standard and the Hydrogen Peroxide Standard.

Palintest Kemio: electrochemical sensors

The Palintest Kemio platform uses single-use electrochemical sensors that give direct, digital PAA results and are less affected by sample color and turbidity. Ramo Trading stocks Kemio PAA sensors and Kemio low-range PAA sensors (0.02–50 mg/L), suitable for low-level applications such as process water and rinse checks.

Titration

For high-concentration PAA solutions, labs often use a two-step titration: first for hydrogen peroxide, then for peracetic acid. Hach titrants such as 0.1 N sodium thiosulfate and potassium iodide solution are common building blocks for iodometric methods.

Tips for reliable sanitizer testing

  1. Test where it matters: at the point of use, not only at the dosing pump.
  2. Test promptly. PAA and peroxide decompose, especially in warm or contaminated water.
  3. Know the interferences. Some methods for PAA can respond to hydrogen peroxide, and the reverse. Choose a method that is specific to the chemical you need to control.
  4. Train operators and keep simple written procedures at each test station.
  5. Log results and corrective actions for your food safety records.

Complete your food safety toolkit

Beyond chemical testing, Ramo Trading supplies hygiene monitoring from Hygiena and Neogen, microbiological water testing from IDEXX, and lab equipment for QC labs. Contact us for a tailored quote.

Comments (0)

Comments are reviewed before they're published.

Related articles