محرك طاولة العمل TXM من Foredom مع تحكم مدمج، اختر القطعة اليدوية مع الضمان

Components:
1. M.TXM Motor: Series TX motors are Foredom's most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. The standard shaft assembly is 39" long with a key tip inner shaft and outer protective sheath for connecting to any of Foredom's key tip handpieces.
M.TXM motors are available ONLY in 115 Volt.

Built-in Speed Control:
The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit.

3. Flexible shaft grease

4. Handpiece- All are for connecting to a key tip shaft:
* H.30 Handpiece:
Foredom's most popular general purpose handpiece features a 3-jaw, geared chuck with a 0-5/32" capacity. Accessory changes are easy with this handpiece using the supplied HPCK-0 Chuck Key.
* H.44T Handpiece:
Collet style handpiece is popular among woodcarvers as it accommodates larger accessories with shank diameters up to 1/4". It comes with 3/32", 1/8" and 1/4" collets. The tapered design allows for close and safe work.
* H.43T Handpiece:
1" shorter collet style handpiece is popular among woodcarvers as it accommodates larger accessories with shank diameters up to 1/4". It comes with 3/32", 1/8" and 1/4" collets. Can fit in smaller spaces. The tapered design allows for close and safe work.