فلتر حقنة سارتوريوس مينيسارت، بولي تترافلورو إيثيلين (PTFE)، حجم المسام 0.2 ميكرومتر، أكسيد الإيثيلين، قفل لوير أنثوي، إبرة (38 × 1.7 مم)، حجم العبوة 50

Applications

• Sterile Filtration
• Venting / Moisture Barrier

Specifications

• Connector Inlet: Female Luer Lock
• Connector Outlet: Needle (38 × 1.7 mm)
• Filter Diameter: ⌀ 15 mm
• Filtration Area: 1.7 cm²
• Housing Dimensions: 25 × 72 mm
• High Flow: No
• Filter Paper/Membrane Color: Yellow
• Flow Rate: 2000 mL/min with air at 0.1 bar (1.5 psi)
• Maximum Allowable Back Pressure: 0.3 bar (4.4 psi) at 20°C
• Total Throughput: Up to 100 mL
• pH Range: 3.0 – 12.0
• Housing Material: Acrylic-based multipolymer compound (MBS)
• Membrane Material: Polytetrafluorethylene (PTFE)
• Maximum Allowable Working Temperature: 60 °C (140 °F)
• Maximum Inlet Pressure: 3.0 bar (44 psi)
• Maximum Operating Pressure: 4.5 bar (65 psi)
• Operating Pressure: 4.5 bar (65 psi)
• Bubble Point: Min. value with water 0.9 bar (13 psi)
• Burst Pressure: Min. value 7.0 bar (102 psi)
• Non-Fiber Releasing: This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
• Pore Size: 0.2 µm
• Wettability: Hydrophilic
• Device Type: Syringe Filters
• Sample Type: Air/Gas, Oils and alkanes according to chemical compatibility
• Sterilization Method: Ethylene Oxide
• Delivery Condition: Ethylene Oxide
• Hold-up Volume: 230 µL before bubble point

Documents

• Catalog
• Datasheet
• Minisart Chemical Compatibility Guide
• Directions for Use - Minisart High Flow | NML | Air | HY | Acticosart